Description:
Onboard ATMega8 chip
With power and programming two lights
Onboard over current
On the target board supports 5V and 3.3V power supply

Support Chip list:
51 Series:
AT89S51, AT89S52,, AT89S53, AT89S8252

AVR Series:
ATTiny12 (L), ATTiny13 (V), ATTiny15 (L), ATTiny24 (V), ATTiny25 (V), ATTiny26 (L), ATTiny2313 (V), ATTiny44 (V), ATTiny45 (V), ATTiny84 (V), ATTiny85 (V), AT90S2313 (L), AT90S2323 (L), AT90S2343 (L), AT90S1200 (L), AT90S8515 (L), AT90S8535 (L), ATMEGA48 (V), ATMEGA8 (L), ATMEGA88 (V), ATMEGA8515 (L), ATMEGA8535 (L), ATMEGA16 (L), ATMEGA162 (V), ATMEGA163 (L), ATMEGA164 (V), ATMEGA165 (V), ATMEGA168 (V), ATMEGA169 (V), ATMEGA169P (V), ATMEGA32 (L), ATMEGA324 (V), ATMEGA325 (V), ATMEGA3250 (V), ATMEGA328P, ATMEGA329 (V), ATMEGA3290 (V), ATMEGA64 (L), ATMEGA640 (V), ATMEGA644 (V), ATMEGA645 (V), ATMEGA6450 (V), ATMEGA649 (V), ATMEGA6490 (V), ATMEGA128 (L), ATMEGA1280 (V), ATMEGA1281 (V), ATMEGA2560 (V), ATMEGA2561 (V), AT90CAN32, AT90CAN64, AT90CAN128, AT90PWM2 (B) , AT90PWM3 (B)

Ender 3
Ender 3 Pro

Packing Includes:
2 X USBASP
2 X 10P Cable
2 X Jumper Cap(Color by randomly)
2 X USBASP 10 PIN to 6 PIN Adapter

FAQ:
Q: I have an Ender 3 without a bootloader, will this work to flash Marlin firmware directly to the board without installing a bootloader?
A: Yes, as USBAsp I was able to load a bootloader on an Ender3 board.

Q: Does this programmer work with atmega328p? i just purchased one thinking it was functionally similar to atmelice which i have used in the past.
A: It does. I have used it via spi to load Arduino sketches to a 328 ( and several 8s)