🎨Description: Luxury feeling:These are by far the most popular 3D Twill-Weave Carbon fiber style vinyl sheet, without the high cost of actual carbon fiber. This unique product is made of UV resistant vinyl that features a carbon textured finish. 🎨 Note: Manual measurement, please allow slight errors on size. The color may exist slight difference due to different screen display. Our goal is to give our customers the best products and services. Installation instructions： 1）Clean the suface where you want to stick. Keep dry and clean. 2）Determine the installation location and then make comparison of the product and installation location. If the product doesn't fit your vehicle, please contact us immediately and DO NOT INSTALL. 3）When tearing off the double-sided adhesive of cover trim, you can't touch the double sided paste with your hand. 4）In order to achieve better effect, if the temperature is below 20 degrees, we suggest heating double sided adhesive with hair dryer or lighter .(Do not heat over 40 degrees). 5）Align position and then paste. The paste effect depends on paste conditions and correct installation. 6）Please do press hard especially on the edges at least 2 mins after installing. 7）Please don't touch water and Keep dry after been install at least 72 hours. Or it will easy to fall off.