Specification:
Model: PCP Air Compressor
Voltage: 110V
Color: Blue
Cooling Method: Fan Air Cooled
Compression Mode: 3-Stage Compression
Power Supply: DC 12V
Power: 250W
Filling Speed: 0.5L(0-300bar), 20mins around
Oil-water Filter: Exist
Oil or Water: Neither Need
Shut Off: Manually
Certification: CE
Inflation Pressure: 30Mpa/ 4500psi/ 300bar
Charging Rate: 16min/ 0.45L/ 0-30Mpa(300bar)
Net Weight: 5.45kg/ 12lb
Package Weight: 7.3kg/ 16lb
Volume: 23 x 17 x 13cm/ 9 x 6.7 x 5 inch
Package Size: 31 x 26 x 25cm/ 12.2 x 10.2 x 9.8 inch

Package Including:
1 x PCP Air Compressor
1 x Transformer
1 x 8MM Quick Connector
1 x Accessories Kit

Test Before Use:
A. Connect the power supply, hose and test plug. (Note: The 12V DC wire must be connected correctly. The red clip to the positive pole and the black clip to the negative pole).
B. Check whether there are loose fasteners.
C. Turn on the compressor start switch. Check whether the cooling fan and compressor work properly.
D. Tighten the bleed valve and observe the pressure gauge needle. The filling speed with the test plug from 0 to 30Mpa is about 20 seconds.
E. Remember to unscrew the bleed valve to release the high-pressure air in the hose before removing the test plug.