Don't rip thin strips with the narrow side of your stock between the blade and your fence—it's not very safe and yields poor results even without the risk to life and limb. Instead, use our Thin Rip Guide for fast, safe, and repeatable results without burning the edges of your work. Our Thin Rip Table Saw Guide makes repetitive ripping of thin strips safer, more accurate and faster than before. Since the strips come off of the left side of the saw blade, there is no burning, binding or kickback. Manufactured from a solid piece of aluminum and beautifully finished, the guide locks itself into any 3/4" wide x 3/8" deep miter slot. The built-in scale features a 1/8" graduation for extra-fine adjustments. The ball bearing holds the stock firmly against the fence while it's smooth operation allows effortless feeding. The Thin Ripping Guide is very easy to use and perfect for your Table Saw, Band Saw and Router Table. Simply set your desired strip thickness, make your cut, reposition the fence so your stock rides against the ball bearing and repeat. You can also position the guide on the right side of the saw blade to make repeated cross cuts using a miter gauge. You'll find many uses for the guide on your bandsaw as well. Instructions included.