Specifications:
Power: 96W
Voltage: DC 12 - 24V
Chuck clamping range: 0.6 - 6mm
Speed: 4000 - 8000 revolutions per minute seven speed control power supply
Theoretical maximum clamping length: 180mm
The theory of maximum turning diameter: 70 mm

Precautions:
1. If the user does not have lathe base experience, when used, should follow: low speed, slowly, cautiously and other security operations.
2. The speed can be adjusted in 0 - 8000rpm, cut wood should not exceed 4000, grinding can use higher speed.
3. Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.
4. If not a cylinder, the speed should be reduced.
5. Tailstock bearing without lock tight.
6. When using a knife, locking the bottom of screw, location should be away from timber 1 - 1.5cm.
7. If you do not really understand the operation, it is best to consult a professional person.