Baileigh hydraulic sheet metal power shear. This high quality shear has a maximum capacity of 10 gauge mild steel at its full 52-inches cutting width. The best part that is operates on 220 Volts single phase power. The hydraulic sheet metal shear has a fully welded rigid frame allowing it to shear metal at full capacity and produces no deflection in the frame or shearing areas, meaning perfect shears every time. Comes standard with high carbon chromium blades that can be flipped and resharpeded. The simple design that allows for ease of operation, the operator has the controls to jog the upper carriage, produce one cut with one foot pedal push, or remain in an auto mode by holding the foot pedal down. Hold downs clamp the material to the in feed table so the material doesn't lift when being sheared. An adjustable back gauge, front table gauges and front arm extensions are also standard. Back gauge length: 24-inches; Shear length: 52-inches; Motor: 5 horsepower; Thickness (SS): 10 gauge; Strokes per minute: 28; Front gauge length: 24-inches; Blade angle: 1 degree; Power: 220 volt/1-phase.