【High Performance】: Large cutting power. Powerful Features and High Integrity. High-efficiency, high-frequency, high-speed carbon dioxide laser matching power supply. It is designed exclusively for Engraving Machine and can be applicable to 60W laser tube of various manufacturers.
【Easy to Control】: The power supply comes with TTL signal indication,water through signal indication and laser output indication. The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc. Moreover the laser power conversion can be controlled by a potentiometer.
【Advanced Technology】: The power adopts Soft Switch Technology, so dramatically increase the efficient and responsive of power supply, and also lengthen service life of laser. Can timely scene judging which part is damaged, laser tube or laser power.
【High Security】: The input and output of power supply are separated completely to avoid getting an electric shock. With well-grounded enclosure, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply.
【Factory Aging Test】: Each power supply will be subjected to a high temperature 60℃ 12-hour aging test under full load, and the power supply test will be started and stopped 500 times in 7 seconds. The separate TEST button also speeds fault detection, so you can troubleshoot system problems with ease.
Tumbling Pin, 5 * 0.5mm 250g Stainless Steel Polishing Pins Tiny Tumbling Media Shot for Jewelry Polisher Finishing
KWD 6.500
6 * 11mm 25pcs Natural Bronzite Irregular Special Cut Stone Beads Loose Beads for Jewelry DIY Making Bracelet 7.5inch
KWD 7.500
The Beadsmith Mini-MAND Mandrel Kit - Oval, 6 Mandrel Sizes & Handle
KWD 19
2-1/2" Rubber Block Bench Stamping Forming Nomar 1" Base for Steel Block Dapping by JTS
KWD 5
