RCmall 4 Packs TS90MD 9g Micro Full Metal Gear Digital Servo 270 Degree Controllable Angle RC Servo for RC Drone Smart Car

Specification:
Size: 22.4 x 12.5 x 22.8mm
Storage Temperature Range: -30°C～80°C
Operating Temperature Range: -25°C～70°C
Humidity Range: 65%±10%
Gear type: Metal
Bearing: No
Horn gear spline: 20T Diameter: 4.8mm, Height:4.3mm
Horn type: Plastic, POM
Case: Engineering plastics (PBT)
Connector wire: 250mm±5mm
Motor: Carbon brush motor
Splash water resistance: No

Operat voltage 4.8V 6.0V
Idle current ≤40mA ≤40mA
No load speed 0.11sec/60° 0.09sec/60°
Runnig current ≤200mA ≤300mA
Peak stall torque 1.6kg.cm 1.8kg.cm
Running torque 1.2kg.cm 1.4kg.cm
Stall current Max 580mA Max 800mA
Command signal: Pulse width modification
Amplifier type: Digital controller
Pulse width range: 500～2500usec
Neutral position: 1500usec
Dead band width: 5 usec
Rotating direction: Counterclockwise (when 1000～2000usec)

Ouptput:
Red wire: Positive +
Black wire: Negative -
Brown wire: Signal S

Package Includes:
4 X TS90MD 9g Micro Digital RC Servo
4 X Accessories Set

Note:
Please use a standard PWM control signal, the period is 20ms, the high level time is 0.5-2.5ms.
270 degrees and 180 degrees can stop at any angle, and the angle can be adjusted.
360 degrees is a continuous rotation, and the angle and speed cannot be controlled.
180 degrees and 270 degrees can control the angle, PWM500-2500 remote control can only have half of the stroke.