Button Function:
Mirror: Shifts between tow kinds of light situation. Mirror Copy and Normal Copy. The default situation is Mirror Copy. When the mirror copy function starts, the mirror light works.
Normal : Shifts between tow kinds of light situation. When the normal copy function starts, the normal light works.
Deepness 1: To set the copied documents by Deepness 1. When the Deepness 1 works, the Deepness 2 goes off.
Deepness 2: to set the copied documents by Deepness 2. When the Deepness 2 works, the Deepness 1 goes off.
Copy: To start the copy function.
Stop: To stop the copy function.
Power: The light indicates that the machine is prepared for working.
Error: The light is to show something wrong happened on the machine. When the TPH is Overheating, the light goes on.

Product information:
Scanning Resolution: Horizontal:8 dot / mm, Vertical(Standard)7.7 line/mm.
Document Type: Fine/Photo. Document size:A5-A4.
Document Thickness:0.06 mm-0.15mm.
Effective Printing width:210mm.
Power: AC 110V-220V;
50Hz/0.46A.
Environment condition: Working Temperature: 5 - 35 Degree, Relative Humidity:20%-80%.
Package Size: 290 mm(W) x 280(D) x 80mm(H) 4.8 pounds

How to use the tattoo transfer machine?
1. Select your favorite pattern and type it on a blank paper.
2. Turn the machine on.
3. Open the transfer paper cover.
4. Put the yellow side of the stencil sheets into the transfer paper input mouth.
5. Put the printed pattern into the document feeder.
7. Set up the copy mode
8. Press the copy button.

Package Includes:
1 * Tattoo Transfer Copier Machine
1 * Instruction manual
1 * Power Cable
10* Stencil Paper