How To Use
1.Place the warmer on a stable and heatproof table.
2.Unpack the facial wax and smash them into small pieces to fill into the warmer
3.Connect the machine into the power. Set the temperature to either 170F. About 20 to 25 minutes later, the facial wax is totally melted.
4.After the wax has melted, turn off the machine and put the heat insulating grid into the machine.
5.Check for suitable temperature before using the wax
6.Clean and dry your skin completely before the treatment
6. Use the brush/silicone spatula to spread an even layer of wax onto your hands/the area you're going to wax and wait for the wax to dry
7. After the wax has dried, slowly dip your hands into the melted wax, with your fingers outstretched
8. Leave your hands in for 20-30 seconds
9. Relate steps 9 and 10 at least 4-5 times until it forms a thick layer on your skin
10.To help achieve a better effect, wrap your hands with the glove liner and put on a pair of heat-preservation cotton gloves
11.After 10-20 minutes, take off the gloves and get rid of the liner
12.Remove the hardened wax from your hands
The paraffin wax can be used three to five times.
Why Choose K-Salon Paraffin Wax Kit?
Remove ageing corneous cells
Relieve fatigue to improve sleep
Promotes the absorption of nutrients and moisture
Promote blood circulation and to alleviate aches and pains
smooth and soften any dry, chapped, rough and scaly skin
Cleaning Tips
To clean the wax pot, just warm up the machine and melt the dried wax a little, and then take out the unmelted wax into your storage bag, then use a towel to wipe the machine the inside of the wax pot to remove any leftover residue. Warning
Keep the wax melt machine away from children.
DO NOT touch hot surfaces during the heating process.
DO NOT apply wax over cuts, burns, or wounds.
Unplug the device when not in.