30 Series 6.5 hp Go Kart Torque Converter kit, 3/4" Bore Mini Bike Clutch Driver Pulley Compatible with 212CC Predator Comet Manco Max Torque - 212cc Tourque Converter Clutch Drive Pulley
Features of 30 Series 6.5 hp Go Kart Torque Converte
Durable, Maximum torque, Wear-resisting, Fast heat dissipation.
Compatible with:
All engines with a 3/4 inch straight crankshaft, Go Karts 30 Series.
Recommended engine:
2HP-8HP
How to install a torque converter?
Step 1: Componets in kit are layed out in front of machine.
Step 2: Remove old clutch kits
Step 3: Bolt bracket to the four standard tapped holes in the engine crankcase using four M8*25 screws. Bracket may be rotated up or dow if necessary.
Step 4: Break chain at proper length to go around sprocket on T.A.V. and final drive sprocket. Join chain by the master link. Move the engine forward or backward for correct tension.
Step 5: Place the spacer (provided with kit) on the crankshaft, to bring the driver clutch in line with the driven unit.
Step 6: Separate driver, place flat sided sheave on crankshaft. Slip belt over driven unit and over post of driver unit. Install 4 splined hub "D" outboard. (IMPORTANT: Be sure bronze idler bushing is in place on TAV 30-75. TAV 30-100 does not require bronze idler bushing.)
Step 7: Place other half of drive on crankshaft. Line up outer cover on the "D" part of the hub, and install retaining bolt and washer.
Attention:
1. Torque converter drive pulley must be bolted tightly to the engine crankshaft.
2. Please be sure to compare carefully with photos and check part number before buying items.