Installation
1 Please check whether the engine oil is clean enough;
2 Before installing the hydraulic tappet, it should be diffused into the oil
3 Use your fingers to test the support seat in the center of the hydraulic tappet, and then select a
strong support without settlement or settlement.
4 When installing, please try to prevent oil from overflowing from the inner cavity of the hydraulic tappet
5 If there is still air entering the hydraulic tappet and causing noise, please follow the "Exhaust
Step" to eliminate the noise
6 During the installation process, do not try to rotate the camshaft, if it is indeed unavoidable, it
should be reduced to the smallest possible extent; 7 When the camshaft needs to be rotated, the camshaft should be rotated as continuously as
possible, and a single stop action should not be performed. Stop in a different position
each time
8 Before starting the engine, refueling steps should be performed as much as possible to reduce
the chance of air entering the hydraulic tappet;
Note: There is no manual