The advanced SLC Caching algorithm technology makes its read/write speed easily 4 times[1] faster than traditional hard drives. Different from traditional mechanical hard drive, the CX2 with innovative and bold design uses FLASH technology with low power consumption and high-speed transfer features. It is the best choice for replacing traditional hard drives. CX2 Solid state drives are shock and drop resistant (1500G/0.5ms) and do not make annoying mechanical noises. It can also effectively avoid computer crash due to kicking. The powerful Wear-Leveling technology and ECC (Error Correction Code) function enhance the reliability of data transfer and prolong the service life of the SSD. Interface SATA Rev. 3.0 (6Gb/s) with backwards compatibility to SATA Rev. 2.0 Capacity 256GB / 512GB / 1TB[2] Voltage DC +5V Operation Temperature 0°C ~ 70°C Storage Temperature -40°C ~ 85°C Terabyte Written 256GB / >60TB 512GB / >120TB 1TB / >240TB[3] Performance Crystal Disk Mark:256GB Read/Write: up to 520/430 MB/s 512GB Read/Write: up to 530/470 MB/s1TB Read/Write: up to 540/490 MB/s[4] Dimensions 100(L) x 69.9(W) x 7(H) mm Humidity 0°C ~ 55°C / 5% ~ 95% RH, non-condensing Vibration 20G (non-operating) Shock 1,500G MTBF 2,000,000 hours Operating System Windows 10 / 8.1 / 8 / 7 / Vista MAC OS 10.4 or later Linux 2.6.33 or later 3-year limited [1] The speed was tested by TEAMGROUP and for the reference only. [1] 1GB= 1.000,000.000 Bytes. In OS system, it would be displayed as 1,000,000,000 Bytes/1024/1024/1024= 0.93GB [2] Definition and conditions of TBW (Terabytes Written) are based on JEDEC standard [3] Transmission speed will vary according to different hardware/software conditions, therefore the data can only use for basic reference.