Notice:
This No-glue film is only for smooth glass.Can not fit to frosted glass or art glass.

Installation:
Step 1. Measure windows and trim film;
Step 2. Clean glass, then wet glass with soapy water(or just clear water also work well);
Step 3. Affix taps on both sides to remove the transparent backing film.( which is a kind of clear vinyl, please MAKE SURE remove it before you apply the window film to glass);
Step 4. Apply to wet glass and smooth with a smooth tool,such as a credit card or a spatula,or hands;
Step 5. Squeegee away water and air bubbles;
Step 6. Cut off the margins.

Tips for you:
1.When applying in cold weather: before installation, blow hot air to the film using a hair dryer to soften the film up (Heat Resistant up to 176℉)
2.Affix a tape on a corner of the back side (the smooth side) to quickly remove the backing film.
3.Do not apply to outside window or windows with cracks.
4.More efficient in teamwork.