This Float valve used to control water level in a storage container and prevent overflow and flooding.

It is very common for people to fill a container manually and forget about it just long enough for the container to overflow and flood the area they are working in.

Installing a float valve in the container allows you to leave and go about your daily activities without having to worry about flooding.

Features:
1. Innovative hang on design suitable for hang on the wall of the aquarium as well as the brace.
2. Suitable for the 518mm thickness of aquarium, and 5-16mm thickness of brace.
3, The water lever range can be adjusted from 2-15cm.
4. Can be connected to the RO machine or supplementary water container.

About Installation
1. Fix the float valve to the bracket according to the instructions structure chart.
2. Fix the bracket of float valve to the wall or the brace of aquarium or the sump.
3. Adjust to the appropriate height of the float valve by sliding the sliding unit.
4. Make sure all part is connecting tightly without leakage. If everything go well it can start.

Important Notice:
1. Please check the water supply and the tube to see whether it is blocked regularly, and make a clean if necessary.
2. Please do not screw the nylon screw too tight otherwise it will cause the bracket broken.