Included Parts
1 x #2 10ft. Wire Rope
2 x Wire Anchors
8 pcs #6 x 1" Ribbed Plastic Anchor
8 pcs M4 x 1" Screws
50 x Clips

Basic Installation Tools
1 x Flathead Screwdriver
1 x 1/4" Masonry Drill Bit
2 x Reusable Wire Ties

Installation Steps
1. Measure installation height to ensure both wire anchors are at the same level.
2. Mark the spots and drill holes.
3. secure wire anchors with screws and ribbed anchors.
4. Thread the steel wire through the wire anchors.
5. Adjust the tightness of the steel wire.
6. Bundle the excess wire with wire ties.

Removal Steps
1. Remove all artwork/picture to avoid damage.
2. Loosen the steel wire to prevent tension.
3. Unscrew the screws.