Complete with an arbor, bearing and clean-cutting 2-wing cutter to quickly cut 3/8"(9.5mm)-deep slots and grooves.
A 1/2" diameter bearing is supplied with every cutter,depth of cut can be changed by purchasing alternative bearing sizes.
With Φ16mm bearing,get 5/16"(7.9mm)-deep slots;
With Φ19mm bearing,get 1/4"(6.3mm)-deep slots;
With Φ22mm bearing,get 3/16"(4.8mm)-deep slots;
With Φ19mm bearing,get 1/8"(3.2mm)-deep slots.
NOTE:
1.A little rust preventive oil deposits on the sandblasted surface (looks a little dirty),is normal and doesn't affect the usage. Absolutely guaranteed to be a good quality new bits!
2.Insert the cutter shanks into the collets as deep as possible,leave 3mm or less shank showing.
3.Before the product is received for using, check the drill bit for cracks or chips,we provide perfect after-sales service.
4.Trial cuts should be made on waste material before starting any project.
SAFETY INSTRUCTIONS:
1.Always wear dust protection mask,eye protection in the form of goggles, safety spectacles or a visor.
2.Make sure use on a router machine for which the product is applicable.
3.Please make sure that the Router Bits and router table connections is tight,void loosening and causing it to throw out !!!
4.Before each use check that the cutting tool is sharp and free from damage.