How to use (ironing)

●1. Keep the back of the patches and the repaired clothing clean and dry before use.

●2. The back of the patches comes with a transparent adhesive film (do not tear off the adhesive), and the household flat iron is adjusted to the cotton file (120-150 degrees).

●3. Place the patches in the position that needs to be modified, the side with hot melt glue is attached to the clothes, ironing from the front of the cloth 10-20 seconds.

●4. In order to prevent scorching, it is recommended to put a thin cotton cloth on the patch (can be an old T-shirt or towel, must be cotton does not fade!). Turn the patch and garment over and iron on the opposite side for 30-60 seconds to ensure glue melts and patch firmly attached to the clothes (or other textiles).

●5. After the temperature is cooled, the processing is completed. If you are afraid of falling off, you can use needle and thread to reinforce the edges.

Precautions

●1. With sequins, beaded, rhinestones, silk flowers, hair ball cloth, and cloth with metal embroidery, should be from the opposite side of the ironing, cloth to be fixed firmly before the corner trim from the front, so as not to damage to the front of the sequins or other accessories.

●2. Patch ironing, the general long-term and clothing (or other textiles) closely. If the patch after a period of time off, or shed after washing, indicating iron ironing temperature is too low, or ironing time is too short, repeat the original operation, once again cloth hot.

△After-sales service: We adhered to the principle of "customer first, quality first". If you are not atisfied with the product, we 100% support returns and refunds to protect your consumer rights and make your purchase worry-free!

△Please feel free to contact us if you have any questions.

★Tornado-Storm serves you wholeheartedly.