This is a 1/8 scale model of the Jayhawk AQM-37C target drone, which has been in operation since 1961. 2 types of glue used to build this model. For that true scale looking fins the Jayhawk fins must be tapered. There are a lot of decals, which will take a lot of time to apply. Requires Assembly. Wood glue, epoxy, CA glue (optional), hobby knife, sandpaper, masking tape, primer and paint needed to build this rocket. Launch system with 3/16" Launch rod, Launch Controller and Rocket Motors needed to launch this rocket. The following rocket motors can be used: Estes D12-5 or Aerotech E20-7. D12-5 is recommended for the first flight.