iShoot Lens Bracket Combo IS-LINKER140 Work as Quick Release Plate or Clamp Separately
or as Lens Collar Tripod Mount Ring Together for Landscape & Portrait Photography
Installation Method:
1. Install IS-LINKER to IS-JZ140 from the reverse side first, and tighten with screws alternately;
2. Install QS-120 with bracket to IS-LINKER; the bracket can slide up and down, and the height can be adjusted according to the size of the lens;
3. Install quick release plate QS-60 to the camera bottom;
4. Fix the installed bracket on the tripod head, the bracket comes with dovetail grooves of RRS/ARCA-SWISS fit.
Caution:
I. The shortest length of the compatible lens cannot be less than 12cm (excluding the lens hood); the front end of the lens cannot be rotated, otherwise it will affect the use;
II. The lens hood cannot be installed in reverse, and some lenses can only be used after removing the hood, otherwise the lens will be stuck.
Compatible with Canon Lens:
RF 15-35mm f/2.8L IS USM
RF 24-70mm f/2.8L IS USM
EF 16-35mm f/2.8L III USM
EF 24-70mm f/2.8L USM (without hood)
EF 24-70mm f/2.8L II USM
EF 70-300mm f/4-5.6 IS USM
EF 70-300mm f/4-5.6 IS II USM
EF 75-300mm f/4.0-5.6 IS USM
EF 75-300mm f/4.0-5.6 III USM
EF 100-300mm f/4.5-5.6 USM
Compatible with Nikon Nikkor Lens:
Z 24-70mm f/2.8 S
Z 24-120mm f/4 S
Z 28-75mm f/2.8
AF-S 16-35mm f/4G ED VR
AF-S 24-70mm f/2.8E ED VR
AF-S 24-70mm f/2.8G ED
AF-S 28-70mm f/2.8 ED-IF
AF-P 70-300mm f/4.5-5.6E ED VR
AF-S 70-300mm f/4.5-5.6G VR
AF 180mm f/2.8D ED-IF
Package Including:
1 x 2-in-1 Clamp & Quick Release Plate IS-JZ140
1 x Quick Release Plate QS-120 with Bracket
1 x Quick Release Plate QS-60
1 x Quick Release Plate Clamp Linker IS-LINKER