Less pay for 2 keys than you would have pay the dealer

Compatible with
2005-2007 Chrysler 300
2007-2009 Chrysler Aspen
2006-2007 Dodge Charger
2007-2009 Dodge Durango
2005-2007 Dodge Magnum
2006-2007 Jeep Commander
2005-2007 Jeep Grand Cherokee

Note
●Please test key signal before program
●It's recommanded to get your key programmed and cut at qualified locksmiths or dealers.
●Self-program requires two original working key, if you only get 1 key, you should have your key programmed at qualified locksmiths or dealers.
Program Instruction( e.g. for 2007 Jeep Grand Cherokee)
1. Insert the first valid key into the ignition switch. Turn the ignition switch to the ON/RUN position for at least three seconds, but no longer than 15 seconds. Then, Turn the ignition switch to the LOCK position and remove the first key.

2. Insert the second valid key into the ignition switch. Turn the ignition switch to the ON/RUN position within 15 seconds. After 10 seconds, a chime will sound. In addition, the Vehicle Security Light will begin to flash. Turn the ignition switch to the LOCK position and remove the second key.

3. Insert the new key into the ignition switch. Turn the ignition switch to the ON/RUN position. within 60 seconds. After 10 seconds, a single chime will sound. In addition, the Vehicle Security Light will stop flashing. To indicate that programming is complete, the Vehicle Security Light will turn on again for seconds and then turn off.