BQLZR Generic 10 Degree 0.1mm Carbide Engraving Bits CNC Router Tool for PCB Board Pack Of 10
All electronics ship with US style plugs.
You may need a voltage converter or a plug adapter.
Special Features
- Size: Shank diameter is about 3.175mm, tool tip is 0.1mm, angle is 10 degrees
- Processing use: suitable for two-color board, acrylic, MDF, PVC, plane engraving, rough processing
- Made of cemented carbide, high hardness, good heat resistance, not easy to wear
- Multifunctional tool: It can be used for engraving, cutting, milling, grooving, grinding, finishing, 2D or 3D engraving, surface processing, etc.
- The diameter of the shank is about 3.175mm, and it can be installed on the rotary tool when combined with the collet.
- NOTE: You have to remember that the tips are very small, like sharps that are smaller than the tip of a needle, so go slow or you'll break them.
{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}
Whiteside Router Bits D7-531 Dovetail Bit with 17/32-Inch Large Diameter 3/4-Inch Cutting Length
KWD 11
Amana Tool 57178 Solid Carbide (Brazed to Steel Shank) Spiral Flush Trim Compression 7/8 D x 1-1/8 CH x 1/2 Inch SHK w/Upper and Lower Ball Bearing Router Bit
KWD 71.500
Jiiolioa V21201 V-Point Router Bit 20 Degree Profile Bit for Outlining Letters in Wood Signs, Tracing Lines and Wood Carving 1/4" Shank 1/4"X2"
KWD 7
Eyech 10Pcs Nano Blue Coat End Mill CNC Router Bits for PCB Mould Plastic Fiber Carbon Fiber Hard Wood 1/8" Shank,1.5-3.175mm
KWD 4.500
