Search

Home / Liyafy / Guitar & Bass Accessories
Liyafy Self-Adhesive Piezo Pickup Transducer 3 in 1 Microphone Contact & Endpin Jack 6.35mm/ 1/4" for Thumb Piano Kalimba and Other Small Instruments in Kuwait Liyafy Self-Adhesive Piezo Pickup Transducer 3 in 1 Microphone Contact & Endpin Jack 6.35mm/ 1/4" for Thumb Piano Kalimba and Other Small Instruments in Kuwait Liyafy Self-Adhesive Piezo Pickup Transducer 3 in 1 Microphone Contact & Endpin Jack 6.35mm/ 1/4" for Thumb Piano Kalimba and Other Small Instruments in Kuwait Liyafy Self-Adhesive Piezo Pickup Transducer 3 in 1 Microphone Contact & Endpin Jack 6.35mm/ 1/4" for Thumb Piano Kalimba and Other Small Instruments in Kuwait Liyafy Self-Adhesive Piezo Pickup Transducer 3 in 1 Microphone Contact & Endpin Jack 6.35mm/ 1/4" for Thumb Piano Kalimba and Other Small Instruments in Kuwait

Liyafy Self-Adhesive Piezo Pickup Transducer 3 in 1 Microphone Contact & Endpin Jack 6.35mm/ 1/4" for Thumb Piano Kalimba and Other Small Instruments

KWD 2.500

Brand
Liyafy
Weight
100 g
1 +

Special Features

  • Piezo pickup is specially designed for small musical instrument, such as kalimba, mbira and other thumb piano.
  • It uses non-marking glue, which will not harm the Kalimba and other instrument paint panels.
  • This mini guitar pickup is suitable for 6.35mm jack; 3 transducers; Cable length: 90mm/3.5in.
  • Simple to install, easy to operate, and does not require a battery, Just plug it into your amp, bass amp or other recording equipment.
  • You can amplify your guitar, mandolin, banjo, violin, ukulele, viola, cello.

Description

About Dreokee Piezo Pickup

Kalimba is a portable and mini musical instrument, very easy to learn and play, but the sounds come out would not be so loud, that's why we need a pickup to increase the volume.

Specification:
Material: Metal + Plastic
Product color: Black
Jack diameter: 6.35mm / 0.25"
Endpin Jack Length: 6.2cm/2.44"
Total length: 20cm / 7.87 ‘'
Endpin Jack Length: 6.2cm/2.44"
No battery, No onboard electronics, Just the pure pickups.

Installation instruction:
1 Take the plastic film down from the back of transducer to expose the adhesive
2 Place the transducer through the sound hole to the lower part of the front body where the guitar produces the best tonal response
3 Drill a hole from inside the body, loosen the end-pin jack nut, insert it to the hole and tighten the nut
Above the procedures for referring depends on different instrument

Package included:
1 x Pickup

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}