Introduction
4.3inch Capacitive Touch Display For Raspberry Pi 4B, With Protection Case, 800×480, IPS Wide Angle, MIPI DSI Interface

Features
1) 4.3inch IPS screen. 800x480 hardware resolution, toughened glass panel, with protection case
2) Capacitive touch panel, support 5-point touch
3) Supports Pi 4B
4) DSI interface, refresh rate up to 60Hz
5) Supports Raspbian, 5-points touch, driver free
6) Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
7) Supports Retropie, driver free

Software setting
1) Download image (Raspbian, Ubuntu, Kali, or WIN 10 IOT) from the Raspberry Pi website.
2) Download the compressed file to the PC, and unzip it to get the .img file.
3) Connect the TF card to the PC, use SDFormatter.exe software to format the TF card.
4) Open the Win32DiskImager.exe software, select the system image downloaded in step 2, and click 'Write' to write the system image.
5) After the image has finished writing, save and quit the TF card safely.
6) Power on the Raspberry Pi and wait for a few seconds until the LCD displays normally. And the touch function can also work after the system starts.

Package Content
4.3inch DSI LCD x1
Black Case kit x1
Cooling Fan x1
Screws pack x1
Screwdriver x1