Versatile PROAIM Cam Tower Stand offers camera stable support while allowing you to explore various shooting arrangements, from capturing high vantage points to achieving flawless overhead shots, all with one gear. The Tower stand is crafted precisely to cater to 35mm & medium format cameras & provides a reliable platform with a working height from 22.5” - 6ft. Boasting a tall post on a sturdy T-shaped base, the stand, with its ingenious design, enables the frame to be positioned near still-life tables & sets. It features a horizontal geared column equipped with a camera head at one end & is counterbalanced by weights on the other end; it can easily be adjusted in height & reach to achieve a desired shooting position. The geared column extends horizontally up to 32” with smooth movement facilitated by a rotating knob & can lock in its position for a seamless working experience. It is designed to be capable of accommodating cameras weighing up to 10kg/22lb at the central position & up to 5kg/11lb when the arm is extended off-center. The camera head with a 3/8” camera screw can be configured in low, underslung & over-slung modes to capture a shot from the preferred angle. It has a utility plate attached to the geared column to keep your miscellaneous accessories within reach. Besides, it lets you roll your setup anywhere around the set, for the base has two pivoting wheels that lock firmly into place with individual wheel locks. SPECS Construction: Mild Steel & Aluminum Compatibility: Medium Format Camera Payload: When horizontal cross-arm is at – Center: 10kg/22lb & Extended Outwards: 5kg/11lb Height Range: 6ft Post Geared Column Extension: 31.5-inch Max. Mounting: 3/8” Camera Screw Product Weight (without Packing): 33.740kg / 74.383lb Product Gross Weight (with Packing): 39.2kg / 86.4lb IN THE BOX Cam Tower Stand w Counterbalance Camera Support Platform Platform Section -1 with Locking Pivot Wheel Platform Section - 2 with Locking Pivot Wheels Accessory Tray 2 x Screws 1 x Spanner 2 x Allen Key T-Type