Overview:
LNK-IMC205GPD-SFP is a mini industrial PoE powered fiber Ethernet switch with PoE Passthrough. Integrated with both Powered Device (PD) and Power Source Equipment (PSE) in one which can receive power and data from another PoE device and pass through. This switch is designed to supply the PoE to IP devices deployed in the field where the power source is difficult to acquire. Single Ethernet cable is capable of providing 71w total power budget and the pass through switch expand up to 4 network ports with PoE.
Features:
One IEEE 802.3bt PD PoE++ Port with 95W Power Input
Four PSE PoE output ports, PoE power budget up to 71W
Two 100/1000BASE-X SFP slots for SFP type auto detection
No AC adapter is required, powered by PoE switch or PoE injector (Can be used as PoE extender)
Expand and repeat your PoE network for up to 4 IP devices
IEEE 802.3at/af/bt Compliant Output
Supports DIN-Rail installation
Compact fanless design avoids overheating and IP40 rugged high-strength aluminum case
-40°C to 80°C (-40°F to 176°F) operating temperature
Specifications:
Ethernet Connector: 5 x RJ45 (1-Port PoE In /IEEE802.3bt, 4-Port PoE Out /IEEE802.3af/at/bt)
Optical Port: 2 x SFP 1000Base-X or 100Base-FX (auto detection)
Packet Buffer: 2Mbits
Packet Length: 10K bytes
MAC Address Table: 4K
Switch Fabric: 14Gbps/non-blocking
Backplane bandwidth: 14Gbps
Packet forwarding rate: 14.88Mpps
Forward & Filtering Rate: 14,880pps (10Mbps); 148,800pps (100Mbps); 1,488,000pps (1000Mbps)
Power Pin Assignment: Mode-B 4/5(+), 7/8(-)
PoE Budget: Up to 71W
Power Consumption:
Input Power: (Pass through PoE) 95W power input from a PoE injector or switch
48~57VDC (Terminal Block) Power Input