MATERIAL Corrosion resistant brass eyelets Manufactured from close mesh knitted HTPP (polypropylene) Boasts unrivalled 450gsm material DIMENSIONS Sizes available: 6ft x 6ft (1.8m x 1.8m) 10ft x 10ft (3.1m x 3.1m) 20ft x 10ft (6.1m x 3.1m) 30ft x 10ft (9.1m x 3.1m) MISCELLANEOUS Colours Available: Green or white For use with a trackway tensioned wire or mounted between two poles (sold separately) Distance between eyelets: 2.2ft (0.7m) Best used with tungsten arrowheads Fire retardant treated to BS 5867-2 Safety Standards and tested by SGS Hemmed reinforced stitched edges & brass eyelets all round Eyelets are spaced 70cm apart (changing to 45cm in 2/3 months' time when new stock arrives) ARCHERY BACKSTOP NETTING SAFETY GUIDELINES: We strongly recommend not keeping your archery backstop netting taut as this will greatly increase the chances of your arrows penetrating the net Keep the net as loose as possible and be left dragging along the floor where possible in order for it to completely absorb the energy of the arrow For example, bunch the net like a half-drawn curtain; the more folds, the greater the stopping power. The weight of the net is what helps to slow the arrows Field Points are recommended for use with these Backstop Nets Please refrain from using Broadheads as these are most likely to pierce the net For ‘have a go' sessions, Backstop Netting is a strong requirement as stated in the GNAS Code of Practice (barring a safe over-shoot space – minimum 50 yards) Archery Backstop Netting is NOT guaranteed to stop all variety of arrows from Recurve, Compound, Traditional or Crossbows Archery Backstop Netting's primary purpose is to be utilised as an additional safety screen, whilst also speeding up arrow retrieval