1. [HIGH PRECISION CHIP] Includes 4X series chip with low power consumption, high precision and wide supply voltage range for mobile applications
2. [Strong practical] Ideal for use in various environments such as computer rooms, weather stations, agricultural greenhouses and soil temperature measurements.
3. [STRONG FUNCTIONALITY] Full calibration, digital output and IIC interface for easy integration, with temperature-based relative humidity function
4. [Reliable and durable] Built with advanced batch processing technology and excellent hardware design for high reliability and long-term stability
5. [LIGHTWEIGHT AND COMPACT] Sensor probe small and lightweight, easy to carry, install and does not take up much space

Specifications:
Item Type: Temperature and Humidity Sensor Sensor
Operating current: Humidity accuracy: ± 3% RH
Temperature accuracy: ±0.2°C
Operating voltage: 3.3V
Temperature Measurement Range: -40 °C ~ 100 °C
Humidity measuring range: 0 to 100% RH
Communication interface: I²C
Working conditions: -40℃~125℃, 0~99%RH
Storage conditions: -20℃~80℃, 0~95%RH
Housing: 304 stainless steel, IP67 waterproof.
Line length: approx. 150 cm/59.1 Inches

Use:
Install and use directly.

Package List:
1 x humidity and temperature sensor probe

Note:
Relative humidity is a function of temperature. Air temperature has a great influence on relative humidity. Acids, alkalis, salts and other compounds have a significant influence on the physical properties of water vapor. Therefore, the following points should be considered:
1. The temperature and humidity sensor should be installed in a place where the temperature is relatively stable and can best reflect the set ambient temperature and humidity.
2. Avoid installation in places with large temperature fluctuations.
3. Avoid installation in places with high air flow.
4. Avoid installation in a blind spot where air does not circulate.
5. Avoid use in an environment with salt spray.
6. Avoid use. in an environment with corrosive gases.
7. The voltage range of the power supply is 3.3V. The recommended supply voltage is 3.3V. A decoupling capacitor of 100nF is connected between the internal power supply and the ground. 9.2 Serial clock input.
8. The humidity sensor not an ordinary electronic component and must be carefully protected. Users need to take this seriously. Prolonged exposure to high concentrations of chemical odors can cause variations in sensor readings. 9. Sensor performance is normal within the recommended operating range. Prolonged exposure to conditions outside the normal range, especially when humidity is > 80%, can result in temporary signal drift (drift after 60 hours + 3% relative humidity). When the sensor returns to its normal operating state, it slowly returns to the correct state. Prolonged use in abnormal conditions accelerates the