NEW MASKING LIQUID TAPE: Protect window glass when painting. It can also be used for glass painting to create a peeling artistic effect. Used on glass and other non-absorbent material surfaces. Cannot be used as a painting primer
EASY TO REMOVE: This liquid masking is highly connective and will not break or be incomplete when removed. Easy to apply, and after it fully forms a film, it is very easy to peel off
GREEN MASKING FLUID: Can clearly identify and accurately locate the areas that need protection, facilitating the judgment of whether the coating thickness is sufficient
Note: When the temperature is low, the masking fluid will freeze and become too thick, so put the bucket of masking fluid into hot water to heat it up and stir it, then use it after it returns to its normal state. When the temperature is high, the masking fluid becomes thin requiring more coats to maintain thickness
SUGGESTIONS FOR USE:
1. Use dry cloth cleans the glass. Stir the liquid thoroughly and apply it thickly(If the glass is not cleaned, it may lead to uneven application)
2. It is recommended to use a roller brush for a more even application. Please do not dilute the product
3. Apply a thick layer of masking liquid to the glass and leave it to dry, use a razor around each grid and pull it off(Occasionally, due to uncontrollable factors, there may be a small amount of residue left. Wiping the glass with a damp cloth can remove it)