Fitment:
Note: Please confirm whether your equipment initially had this seal. It may not be applicable to all LEER 100XQ truck covers!
Compatible with the older Leer 100XQ all glass rear doors that do not have a door skirt，Leer Truck Cap 100XQ 65"
Fits 3/16" thick glass. Once installed the flap will hang down 1/2" from bottom of glass door

Installation steps:
Note: If the seal seems too tight when closing the door against the tailgate, you may have to adjust the rear door up at the hinges.
1,Remove all tape/residue from the old seals and glass.
2, Clean the glass with alcohol to remove all dirt and oil.
3, Peel off the backing from approximately 2 inches of 3M tape on both ends of the seal and push the seal to the edge of the glass. Once the seal reaches the desired position, gently peel off the remaining backing from the tape.
4, Press it evenly onto the glass on the side of the seal and tape to help bond.

Product size:1.37in tall, 66.9in length
Replace Part Number:82792
Package Included:1Pc Truck Cap Topper All Glass Rear Door Bottom Seal
After-Sales Service:You can contact us freely if you have any question;We will reply you within 24 hours.