Motor speed: 22000RPM (Large homogenizer: 8000-18000RPM, Small homogenizer: 8000-20000RPM)
Motor power: 250W
Weight: 7KG
Instructions:
The instrument should be placed on a horizontal work surface, and the required homogenizing tools must be in place. When the power is turned on, use a cup or vessel containing water to make the plum blade submerged in water. Turn on the power switch. Quickly adjust the speed knob, no obvious metal friction sound (if there is metal friction sound, turn off the power, loosen the 6M / M tightening screw of the cutter, randomly turn the outer fixing sleeve into place, and then tighten it). Cut the plants or microorganisms to be tested into small pieces or small pieces, place them in the glassware provided with them, sandwich them in the magnet holder (sigma shape), loosen the 8M / M fixing screws holding the motor base, and slowly align them Move the mouth of the vessel down so that the homogenizer head is 2-3mm away from the bottom of the vessel, and then tighten the 8M / M screws.