5 PCS Frameless Shower Door Bottom Seal for 3/8 Inch Glass - 5 x 15.75 Inches, Frameless Glass Door Seal Strip, 5 Sections Segmented Shower Installation Kit
Scope of application: Fameless shower door bottom seal can perfectly fit 3/8 inch (10 mm) thick glass. Please measure the glass thickness and bottom gap before purchasing to avoid trouble due to inapplicability.
High quality: Shower door bottom seal is made of high-quality PVC material, which is non-toxic and odorless, has high compressive strength, and will not deform or discolor after long-term use. The bottom waterproof material is soft enough to effectively reduce the friction when the bathroom door slides.
5 Segmented installation: The bottom seal of the frameless shower door is installed in 5 sections, with each section being 15.75 inches long. The excess length of the sealing strip of the glass shower door can be cut off as needed, and then each section of the sealing strip can be installed.If the quantity of the products received is incorrect, please contact us.
Wide application: The wing at the bottom of the seal is soft and fits tightly with the 45° inclined sink on the side of the seal to prevent water from dripping onto the shower floor and keep the bathroom dry and clean. It can be widely used in shower doors, sliding doors, glass doors, door bottoms, etc.
Easy installation: The glass door seal is easy to cut and shear. The segmented design makes it more suitable for more scenarios. It can be cut and spliced according to the required length. No adhesive is required (Note: Please wipe the glass door before installation). Place the sealing strip under the shower door so that it is completely close to the glass.