Introducing our Electronic Constant Temperature Oil Water Bath, a reliable solution for precise heating and temperature control in laboratory and industrial settings. This versatile water bath is perfect for scientific research, material testing, and any application requiring stable temperature maintenance. **User-Friendly Operation:** 1. Set the oil water bath on a flat surface and connect the drain hose. Fill the bath with clean or pre-heated water to enhance heating efficiency. 2. Power on the unit, indicated by the red OFF light. Adjust the temperature knob to your desired setting—the water will start to heat, and the ON light will activate. Once the set temperature is achieved, the light will turn off, ensuring consistent temperature maintenance. 3. For best results, submerge your containers in the water bath to maintain a constant temperature. 4. To further ensure temperature consistency, seal the contact points between the container and the bath with cardboard, keeping the material submerged. 5. After use, remove the containers, turn off the power, and drain the water while documenting the usage. **Specifications:** - Model: Lift Type - Capacities: 2L, 3L, 5L - Temperature Control Range: Room Temperature to 250℃ - Temperature Control Accuracy: ±1℃ - Control Method: PID Intelligent Temperature Control - Temperature Uniformity: 80% - Power: 1.2KW, 1.5KW, 2KW - Inner Tank Dimensions: 240x140mm, 260x150mm, 280x170mm **What's Included:** - 1 Host Unit - 1 Instruction Manual **Quality Assurance:** We prioritize high quality and reliability. Should you have any questions, feel free to contact us, and we will respond within 24 hours to assist you. Enhance your laboratory experience with our Electronic Constant Temperature Oil Water Bath—a perfect blend of performance and efficiency tailored to meet your scientific needs.