Stable Low-Latency Image Transmission: Provides stable, low-latency real-time image transmission when used with a remote controller or FPV goggles for clear visuals and responsive control.
Pre-Installation Required · No Hot-Swapping: Must be installed before powering on the aircraft. Hot-swapping is not supported. Ensure the module is securely installed to avoid signal or hardware issues.
Compact & Lightweight Design: Compact size (44.6 × 27 × 44.6 mm) and lightweight construction (approx. 9 g) add minimal impact on flight performance and allow seamless integration.
For connecting a remote controller or FPV goggles to enable image transmission and remote flight.
High-Quality Genuine New Accessories, Precision-Made, Durable and Reliable.

Important Notes:

1. This product does not support hot-swapping. Please ensure the module is securely installed before powering on the device.

2. Make sure the module is fully seated and properly fixed before startup to ensure correct system initialization and avoid connection issues.

3. Do not remove or replace the module while the device is powered on, as this may cause damage to the module or internal electronics.

4. Avoid applying external force to the antennas to prevent deformation or damage, which may affect signal quality.

5. After every 30 hours of operation (approximately 60 uses), check whether the screws are loose and ensure they are securely tightened.

Technical Specifications:

Dimensions: Length 44.6 mm × Width 27 mm × Height 44.6 mm

Compatibility: Compatible with Neo 2

Hello,

Search