Model: #25 Roller Chain Sprocket B Type 25 Tooth, 25mm Bore, 6.35mm (1/4") Pitch, for ISO 04C Chain.
Material: The sprocket is made of C45 carbon steel with a full black oxide coating, which is rust-proof. The tooth part uses high-temperature quenching heat treatment, high hardness, wear resistance, a long service life, and is easy to use
Design: Each roller sprocket is equipped with strong teeth to lock the chain well. The round hole has set screws and forms a 90-degree angle with the set screw after installation, which can fix the shaft and prevent it from slipping
Installation: Chain Sprockets are normally mounted in a fixed position on a fixed shaft. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. It is suggested that chain sprockets have at least three teeth in mesh with the chain
Wide Application: Sprockets can be used in various industrial areas, especially in power transmission industrial machinery, such as milling machines, drilling machines, drilling rigs, or other mechanical transmission occasions
uxcell #25 Chain Roller Sprocket 10mm Bore 29mm OD, 13 Tooth C45 Carbon Steel ANSI #25 Roller Sprocket Round Hole with 4x1.8mm Keyway & Set Screws for ISO 04C Chain, Black
KWD 3.500
uxcell #25 Chain Roller Sprocket 15mm Bore 33.5mm OD, 15 Tooth C45 Carbon Steel ANSI Chain NO.25 Roller Sprocket Round Hole Without Surface Finished for ISO 04C Chain
KWD 3
uxcell 2 Pcs #40 Chain Roller Sprocket 3/4" Bore, 10 Tooth C45 Carbon Steel ANSI #40 Roller Sprocket Round Hole with Set Screws for ISO 08A Chain
KWD 8.500
uxcell 2 Pcs #25 Chain Roller Sprocket 10mm Bore, 11 Tooth C45 Carbon Steel ANSI #25 Roller Sprocket Round Hole with Set Screws for ISO 04C Chain
KWD 4
