Search

Search

Home / MS MetalShipper / Metals & Alloys
Bullet Casting Alloy (10lb Ingot - 2% Tin, 6% Antimony, 92% Lead) by MS MetalShipper in Kuwait Bullet Casting Alloy (10lb Ingot - 2% Tin, 6% Antimony, 92% Lead) by MS MetalShipper in Kuwait

Bullet Casting Alloy (10lb Ingot - 2% Tin, 6% Antimony, 92% Lead) by MS MetalShipper

KWD 27
Category
Metals & Alloys
Weight
4.5 kg
– 1 +

Special Features

  • Bullet Casting Alloy consists of 2% tin, 6% antimony and 92% lead. This metal is sometimes referred to as hardball bullet casting alloy. This modern version of the old Lyman #2 is an excellent all-around alloy.
  • This bullet casting alloy and is very good to use for casting. This item is one of our most popular items because of its versatility and ease of use.
  • Each piece of alloy is approximately 10.25 inches long by 2 inches wide by 1.25 inches high
  • Melting Point (F) = 621 | Atomic Mass= 207.2 | Boiling Point (F) = 3180 | Density (g/cm3) = 7.29 | Weight (lbs/in3) = 11.34 | Analysis: 2% Tin, 6% Antimony, 92% Lead.
  • This 10lbs of alloy will arrive sealed inside a heavy duty plastic bag to prevent any corrosion or oxidation.

Description

Bullet Casting Alloy consists of 2% tin, 6% antimony and 92% lead - also known as "hardball" bullet casting alloy. You are purchasing 10lbs of this bullet alloy ingot. The 10lbs may arrive as multiple pieces of ingot totaling 10lbs. This modern version of the old Lyman #2 is an excellent all-around alloy for most handgun bullets and many higher velocity rifle cartridges. The Brinell Hardness of Hardball Alloy is very close to 16.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}