Brand Story of FRXIE
FRXIE was born from a simple belief: the right tool makes all the difference. We are dedicated to providing that one, precise tool to simplify your toughest repairs, because you deserve reliable quality.

How to Use Correctly
1. Skin Contact is Key: Wear the band with the metal plate directly on clean, bare wrist skin. No clothing in between.
2. Connect to True Ground: Attach the alligator clip to a confirmed, unpainted grounded metal point, such as:
- The casing of a grounded appliance (e.g., refrigerator),
- The unpainted metal frame or chassis of the device you are working on,
- Or a certified grounded ESD mat.
For a secure connection, clip firmly onto a thin metal edge.

How It Works
This wristband safely dissipates static electricity from your body to ground through a built-in ~1 MΩ resistor. This serves a dual purpose: it protects sensitive electronics from static discharge, and it limits current to reduce shock risk if you contact live voltage.

Critical: How to Test Correctly
⚠️ Only use the Resistance (Ω) function on your multimeter.
DO: Set to Ω, range ≥ 2 MΩ. A reading between 0.8 - 1.2 MΩ confirms perfect function.
DO NOT: Use the continuity/beeper ())) mode. This mode only beeps for very low resistance (＜50 Ω). Since the wristband has a ~1 MΩ resistor, no beep is correct and safe. A beep means a dangerous short circuit.

For Best Performance
1. For dry skin, apply a bit of hand lotion to improve conductivity.
2. For periodic system checks, use an ESD Wrist Strap Tester while wearing the strap properly. A green light confirms a complete, working circuit.

Common Uses
PC building, electronics repair, treadmill static protection, and other static-sensitive tasks.

Our Service
We stand behind our products. Our support team is ready to provide a satisfactory solution within 24 hours for any product issues.

What's Included?
Adjustable Wrist Strap*1
8.2 ft PU Coiled Cord*1
Alligator Clip*1
Manual*1