Specs & OE — Part No. 89633-24010 (also shown as 8963324010). Function: Relay, Traction Control or VSC (Hydro Motor No.1 / ABS pump motor circuit). Direct plug-in replacement; restores ABS/VSC/TRAC function when the pump relay fails.
Install & Location — Location: engine-compartment fuse/relay box (under-hood), stability/traction control section, associated with the ABS & VSC hydraulic modulator. Install steps: key OFF → pull old relay straight up → seat new relay fully → clear DTCs and verify pump run command; replacing an ABS relay can resolve warning lamps where the relay was the fault.
Complementary parts (often serviced together for ABS/VSC repairs; search by OE to capture related traffic) — Relay, Skid Control No.2: 88263-24020 / 88263-24030; Skid Control Computer (example): 89540-34080 / 89540-60300; Yaw Rate Sensor (example): 89183-60010 / 89180-60040; Wheel Speed Sensor (example): 89543-60050. Use VIN to verify exact sub-components for your vehicle.
Description
Part No.: 89633-24010 (also referenced as 8963324010). This relay controls the traction/VSC hydraulic pump motor (Hydro Motor No.1) within the ABS & VSC system.
Restores traction control (TRAC), Vehicle Stability Control (VSC) and ABS function when the pump relay has failed.
Designed for the engine-bay fuse/relay block, interfacing with the ABS & VSC hydraulic modulator.
Location: engine compartment relay/fuse box (under hood), stability/traction control section.
Installation: switch ignition OFF, remove the old relay vertically, press the new relay firmly into the same socket, then clear DTCs and verify pump operation per service manual.
Replaces OE: 89633-24010 (verify the stamped number and your VIN before ordering).
Relay, Skid Control No.2: 88263-24020 / 88263-24030
Skid Control Computer (example): 89540-34080 / 89540-60300
Yaw Rate Sensor (example): 89183-60010 / 89180-60040
Wheel Speed Sensor (example): 89543-60050 (verify by VIN)