【Pre-programmed TPMS Sensor】The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,just activate them with TPMS scan tool.
The specific operation is as follows Step:1.Set the vehicle gear to P gear and pull up the handbrake,Properly install tire pressure sensors 2.Ensure all tires are inflated to the pressure listed on the tire placard.(located in the door jam of your vehicle).Let it stand for 5 minutes3.Starting with LF tire,use the TPMS tool to trigger each sensor in the following order:LF,RF,RR,LR&full size spare(if equipped)4.Turn ignition to ON position5.Connect TPMS tool to OBD II port then write sensor IDs6.Switch off,then switch on the ignition.7.Test drive abve 19 mph(30km/h) for at least 10 minutes,make sure tire pressure monitor system work fine(TPMS light off)
【High QUALITY】The battery can be used normally for more than 5 years, the pressure reading can reach 110 PSI or higher, and the temperature can reach -40~125℃,same as OE quality
【APPLICATION】Compatible for Honda Accord 2008-2012, CR-V 2007-2011, Fit 2008
【REPLACE PART NUMBER】42753SWA316,42753SWAA53
【GOOD SERVICE】One year warranty.We all 100% tested before leaves our factory.Any problem for tpms sensor,Please do not hesitate to contact us!