The JHEMCU GF30F745-ICM is a premium flight controller designed for FPV pilots who demand precision, power, and advanced features. Running on the STM32F745 216MHz processor and equipped with the ultra-precise ICM-42688-P gyro, this board is ready for racing, freestyle, or cinematic drones. It supports Betaflight 4.5.0 firmware and is packed with key functions like a barometer, blackbox, GPS and compass support, and HD O3 system compatibility.
With 7 UARTs, ELRS, TBS, SBUS, IBUS, DSM2/DSMX receiver support, and dual BEC outputs (5V/2.5A and 10V/2A), the GF30F745-ICM gives you ultimate flexibility. Its robust 30.5x30.5mm mounting and Type-C USB connection make integration smooth for any pro-level build.

Features:

STM32F745 216MHz processor with ICM-42688-P gyro for high-speed, stable control
Full Betaflight support with 16MB blackbox, barometer, GPS, compass, and HD O3 compatibility
Dual BEC outputs: 5V/2.5A and 10V/2A for powering peripherals
Supports ELRS, TBS, SBUS, IBUS, DSM2, DSMX receiver protocols
Type-C USB, 7 UARTs, LED programming, current and voltage sensors, and DFU button
Specifications:

Master: STM32F745VG (216MHz)
Gyroscope: ICM-42688-P
Barometer: SPL06
OSD chip: AT7456E
Blackbox: 16MB
Input voltage: 3–6S
BEC outputs: 5V/2.5A, 10V/2A
UARTs: UART1–UART7
Receiver support: ELRS (CRSF), TBS (CRSF), SBUS, IBUS, DSM2, DSMX
ESC signal: DSHOT150, DSHOT300, DSHOT600
GPS: Yes
Compass: Yes
HD O3: Yes
I2C interface: Yes
LED programming: Yes
Buzzer support: Yes
USB: Type-C
Current port: Yes
Voltage sensor: Yes
DFU button: Yes
Weight: 7.5g
Dimensions: 36mm x 36mm
Mounting holes: 30.5mm x 30.5mm, 4mm
Firmware: Betaflight_4.5.0_JHEF745-ICM.HEX
Package Contents:

1x JHEMCU GF30F745-ICM Flight Controller