All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
Working Principle: TEMT6000 ambient light sensor converts ambient light intensity into an analog voltage signal through the photoelectric effect. Its core is a phototransistor. The light intensity is proportional to the base current, and the output voltage value changes linearly with the light intensity
Human Eye Bionic Optical Properties: The spectral response peak of the TEMT6000 sensor is at 570nm (green light band), which is highly matched with the human eye's sensitive band to green light (550-570nm); infrared suppression ratio >10:1, effectively suppressing infrared interference; half-angle sensitivity ±60°, even with large-angle incident light, it can still maintain linear response
Illuminance Detection Range: Linear measurement range 1~1000 lux (corresponding to 0~5V output), when the range is exceeded, the output will be saturated (for example, 5V is maintained when >1000lux)
Working Voltage: Working voltage range 3.3V~5.5V (including 5V TTL level system), voltage will affect output linearity, it is recommended to use 5V power supply
Applicable Scenarios: Can be used for smart devices, such as automatic adjustment of mobile phone/tablet screen backlight; brightness control of smart lamps; adaptive instrument panel lighting; ambient light monitoring and energy-saving management, etc
TCS3200 Color Sensor Module, 3-5V Color Recognition Sensor Anti-Light Interference Controllable Module for Arduino
KWD 4
4pcs MCP2515 CAN Bus TAJ1050 Receiver Module SPI Interface for Arduino
KWD 4.500
3PCS IIC/I2C 1602 LCD Blue Screen, 20x4 Module Display with IIC I2C Adapter with 7.87inch 10P Male to Female Dupont Cable for Arduino Raspberry Pi
KWD 5
3pcs ESP32 S2 Mini V1.0.0 WiFi Board Based ESP32-S2FN4R2 ESP32-S2 4MB Flash 2MB PSRAM USB Type-C Interface Compatible with MicroPython, Arduino, ESP-IDF
KWD 5.500
