REPAIR DELICATE ASSEMBLIES: The DCT Glue Applicator Syringe provides up to 550 PSI of pressurized power to apply glue in small places; Injector syringe holds 20 mL (0.7 fl oz) of water-based wood glues; For veneering, lutherie, craft and hobby gluing, furniture joints, wicker chairs, wooden screen doors, laminates, cabinetry, stair rails and banisters, floor squeaks, or even jewelry making and cake decorating; Additionally use for mechanical work to place fine beads of silicone gasket material
EASY TO LOAD: Includes an easy fill-port design that allows you to load glue into the chamber two different ways; Method 1 – Unscrew top where handle is, pull out plunger, pour in glue, screw top back on, flip syringe with tip upwards, remove air, screw on your desired tip, and apply; Method 2 – Remove brass tip, submerge this end in a glue container, pull plunger back until full, reinstall brass tip, and apply
EASY TO DISPENSE: Dispensing syringe allows you to apply glue under pressure; If you do not enough space to get glue into a joint on your project, instead of disassembly your project, you can drill a small hole and inject glue through the hole into the joint using this wood glue injector
MAINTENANCE: Moisten O-ring before inserting plunger and screwing brass tip into barrel; Do not allow glue to dry in the injector (injector may be immersed in water to prevent glue from hardening); Clean well after use; Removable plunger and brass nozzle allow you to clean thoroughly with warm water and brush (not included) (do not use solvent); Regularly lubricate and use cooking oil on O-ring for a smooth, airtight seal
PACKAGE CONTENTS: Package includes (1) adhesive syringe and (2) brass tips with O-rings (1/16-inch and 1/32-inch nozzles); Wood glue not included