Using double-panel design PCB;
MCU control, stable and reliable performance, strong anti-interference, will not trigger by mistake, superior performance than CD4013;
With high-power regulator to provide adequate and stable voltage, and have enough cooling holes to ensure long-term stable and reliable products work;
With anti-power reverse diode protection, a short time reverse power supply without any damage to the product;
The use of genuine high quality relay control load, 250V 10A (AC) and 30V 10A (DC) under the load can withstand;
Triggering can also be an external trigger switch, the product is equipped with a good seat and lead wire, more convenient to use.
Trigger can also be triggered by other sensor modules, as long as the low level trigger is valid, the function has more expansion;
Electrical parameters:
Supply voltage: 5V
Supply current: greater than 100mA
Load: 250V 10A (AC) or 30V 10A (DC)
Life: 1 million times
Product instructions:
1. Connect the corresponding direct power supply according to the voltage version;
2. The power supply is not required to be connected according to the line drawing. Although there is a protection circuit, it cannot be reversed for a long time;
3. The product uses a Zener tube (5V without a voltage regulator), which is slightly hot, which is a normal phenomenon. The relay has a normal heating phenomenon for a long time, which is a normal phenomenon;
4. The load power should have a certain margin for the relay load. It should avoid high power (about 2000W) and work for a long time, which will have a certain impact on product life.
Package Included:
1*5V 1 Channel Latching Relay Module with Touch Bistable Switch