1) The pci-e 1x card work for U.2 and U.3 SSD,not work for SATA/SAS SSD.The speed and other properties is not changed,only form conversion interface.Transparent to the operating system and does not require any software drivers.
2) This PCI Express card expands the PC by one U.2/U.3 SFF-8639 interface.It can be connected e.g. the U.2/U.3 U3 PM1735 Series SSD.
3) U.3 is a Tri-mode standard, building on the U.2 spec and using the same SFF-8639 connector. It combines SAS, SATA and NVMe support into a single controller. Where firmware support is available, U.3 can also support hot-swap between the different drives.
4) To avoid damage to the device, ensure that the installation direction is correct. Does not support hot-plugging.
5) U.3 drives are still backward compatible with U.2, though—the U.3 drives determine which host type it is inserted into (by using different combinations of HPT0 and HTP1 being open or ground), and configure the data lanes on power-up. U.3 drives can still act as dual-port NVMe drives in supporting systems.U.2 drives are not compatible with U.3 hosts.
10Gbps PCI-E Express 4X & Mini DP Displayport 1.4 Input to Dual USB3.1 Type-C USB-C & 4K 60hz Output Desktop Graphics Expansion Card Adapter ASM3142
KWD 19
SFF-8482 SAS 29Pin Target to 7+15 22Pin SATA Host HDD Disk Drive Raid Adapter 6Gbps with Chipset and Power Port
KWD 11.500
PCI-Express 4.0 PCIE 4X to Oculink Single Port SFF-8612 SFF-8611 Host Card for U.2 SSD eGPU External Graphics Card Dock
KWD 8.500
NVME M-Key PCI Express NGFF to SATA 3.0 6Gbps 5 Ports Adapter Converter Hard Drive Extension Card JMB585 2280 for NAS Computer (5-Ports)
KWD 12.500
Kuwait