ETCR1000C adopts clamp-type non-contact induction measurement, no need to strip the wires, no need to touch the high-voltage exposed live wires, directly clamp the three ultra-inductive high-insulation clamps to the insulation skin of the three-phase live wires to detect the phase At the same time, sound and light indicate the positive or negative state of the phase sequence of the three-phase power supply. There are four powerful magnets attached to the back of the meter, which can be sucked and hung on the distribution box for use. At the same time, it has functions such as live line check, simple power check, open circuit search, break point location, line maintenance and so on.

Specification:
Model:ETCR1000C Non-contact Phase Sequence Detector
Available Clamp Wire Size:ø1.6mm-ø16mm
Live Power Range:AC70-1000V, 45-65Hz (Sine Wave Continuous Input)
LED Display:
[Positive phase sequence] The phase detector lamp lights up clockwise.
[Anti-phase sequence ] The phase detector lamp lights up  counterclockwise.
[Live power] L1, L2, L3 lamps light up in setting voltage range. [Default phase] L1 or L2, or L3 lamp is not lighting.
[Open circuit] L1 or L2, or L3 lamp is not lighting.
Buzzer:
[Positive phase sequence] the buzzer sounds intermittently.
[Negative phase sequence] the buzzer sounds continuously.
Battery Check:The POWER indication lamp light up after boot up; the LOW BATTERY lamp light up when low battery
Magnet:Four magnets are installed on the bottom plate of the instrument, which can be attached to the distribution box, load weight 800g
Auto Shutdown:5 minutes after booting up, the meter automatically shutdown
Clamp Lead Length:0.6m
Max Measure Voltage:AC 1000V
Insulation Strength:5.4kVrms
Maximum Rated Power:300mVA
Weight:200g
Dimension:70mm×75mm×30mm
Power Supply:2PCS(LR6)AA alkaline batteries{Not included}