①This is an intelligent instrument that integrates the four functions of battery testing(analyzing), charging, discharging and maintenance. It is designed with a portable plastic shell, and with color TFT displayer and silicon touch keys.For 2V~18V 2-200Ah Pb-Acid(AGM,Calcium,GEL, MF,EFB,SLA, VRLA, WET, Gel), Li-Ion, LiFePO4, NiMH, NiCd Batteries，It can be used to perform performance testing, capacity testing, characteristic curve measurement, and activation and maintenance of long-term storage batteries for various commonly used rechargeable batteries.widely used for performance testing and routine maintenance of most rechargeable batteries in many portable electronics electrical devices.
②Battery Charging: can set constant current & constant voltage for charging process.According to the selected battery type and charging parameters, the system automatically calls the best charging process curve. When charging, the LCD displays the following information：Discharging,SOC,SOH,RES,Time run,Discharg，battery voltage, battery current,battery capacity, battery type，Full charged from empty,test Capacity,Full charged from no-empt,est. Capacity,charging curve of the battery.It has a variety of abnormal safety protection measures such as battery reverse connection, wrong connection, short circuit, overvoltage, undervoltage, over-current and over-current heat.
③Battery Discharge: can set constant current value & cut-off voltage for discharging.Automatically discharge according to the selected parameters;During discharging process, screen will be following view：Discharging,SOC,SOH,RES,Time run,Discharg，Voltage, battery capacity, battery type,Discharged from full,test Capacity,Discharged from non-full,est. Capacity,charging curve of the battery.
④Battery Test&analyze: can measure battery voltage, internal resistance, SOC, SOH, true effective capacity Ah value and charge/discharge curves.Measure battery voltage, internal-resistance, SOC and SOH within 5 seconds SOC, means State-of-charge of battery, range is 0 ~ 100%.SOH, means State-of-health of battery, range0~100%.
⑤Battery Maintenance:Automatic maintenance based on selected battery parameters:For batteries that have been idle for more than 6 months or have been floating charged for a long time, it should be regularly (preferably every 6 months or so) standard charging and discharging maintenance process. The standard maintenance procedure is to use 0.2C current first fully charge the battery - then drain the battery with 0.1C current - then use 0.1C charge current to full fill the battery. After finished this maintenance process, the vitality, the life time and the effective capacity of battery will be protected and improved to the maximum.
Corpco 4 x AA Battery Holder with Standard snap Connector 6V Output Type BH341 2 Pack
KWD 3
BT‑168PRO Battery Tester Cell Battery Checker Tester Digital Display Battery Capacity Tester for 1.2~4.8V 9V Batteries
KWD 13
-14%
YXQ AA AAA Battery Storage Box Organizer Holder Portable Clear Plastic Case Container - Holds 20xAA+14xAAA Batteries
KWD 3
CNBY® Charger CTC720 Replace for Snap on 18V CTB8185 CTB8187 CTB7185 CT7850 CT8850 Battery US Powerwings
KWD 13
