Instructions for Use:
1. Thoroughly clean the surface to remove dirt and debris.
2. Apply the adhesive evenly to the damaged area, covering approximately 1-2 cm around the damaged area. Ensure complete coverage. Gently press the adhesive area to ensure a firm bond.
3. If the damaged area is large, prepare a patch material of similar material and appropriate size to the wetsuit. Accurately place the patch over the damaged area, ensuring it adheres tightly to the wetsuit surface. Press firmly with your fingers or other tools to allow the adhesive to fully develop its bonding properties.
4. Place in a well-ventilated area and allow the adhesive to dry and cure. Initial curing time is 1-2 hours, and complete curing is 3-4 hours. Actual curing time depends on the evenness of the adhesive application.

Precautions:
1. Ensure the surface is dry and clean before application.
2. Initial curing time is 1-2 hours, and complete curing is 3-4 hours.
3. Cover approximately 1-2 cm around the damaged area to ensure complete coverage.