Search

Search

Home / KEXYOAN / Sports Fans Merchandise
KEXYOAN Drawer Handles 2-Pack All-Copper Retro Kitchen Cabinet Desk Wooden Box Hardware Brass(Vintage Brass,Hole Center 66mm) in Kuwait

Vintage Brass Hole center 78mm

KWD 15.500
Brand
KEXYOAN
Weight
50 g
ColorVintage Brass
SizeHole center 78mm
– 1 +

Special Features

  • Add rustic charm to your furniture with these Drawer Handles.
  • You will get 2*pure copper drawer handles, 4 M4*25mm stainless steel screws, suitable for door panels with a thickness of 20mm. If you need screws of other lengths, please contact us and we will send the length you need.
  • PIYYQNY Our gold drawer pulls are forged from solid pure brass, the handles are hand-brushed, the surface is glazed at high temperature, it will not fade or after long-term use, and can last for years, so you don't have to spend too much on cabinet handles
  • Our cabinet pull knobs and handles contain fixing screws, which can be easily installed independently, just find the location on the board where you want to install and drill a hole. Then insert the screw from the back of the board and tighten it firmly onto the button
  • 45.5g (refer to the detailed size of the attached figure)

Description

Material: Brass
Technology: Surface glaze brushing, wear-resistant, can maintain metallic luster for a long time
is not easy to or fade even after long-term use.
Classic simple style which is suitable for various home style.
NOTE:
the screws of Cabinet handles are 2.2cm/0.87in,
so the Drawer Knobs only fit 1.8cm/0.71in thickness board,
please check your furniture thickness before you buy.
If you need screws of other lengths,
please contact us,We will send you the screws of the required length,
Thank a lot.
Applications:
Suitable for drawers, vanity desk, wine cabinet, dresser, cupboards,
chest, nightstand, bifold doors, mirrored furniture, bathroom cabinet,
bedroom closet kitchen cabinets, etc.. Update your kitchen cabinets,
children's room or bathroom vanities with these Cabinet Knobs.
Installation Steps:
1. Determine the installation location
2. Drilling a 0.16"(M4) diameter hole for screws
3. Fasten the knob handle with the screws
4. Install finished
Warm Tips:
1. Please allow a 1-3mm error due to manual measurement.
Please make sure you do not mind before ordering.
2. The color may have a difference as the different display,
please understand.
3. Do not use corrosive liquids to clean the surface.
Wipe with a soft cloth.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}