The Optex 26-Foot Range Microwave Vehicle Presence Sensor with Car Counting detects the presence of moving or stationary vehicles all while having the ability to ignore human movement. It uses doppler shift and FMCW (Frequency-Modulated Continuous-Wave) detection technologies to count moving vehicles, and unlike other vehicle sensor units, it installs above the ground. This eliminates the hassles associated with installing a ground loop. You won't have to worry about cutting concrete or having to stop traffic through your driveway during installation.
The Optex 26-Foot Range Microwave Vehicle Presence Sensor with Car Counting has a detection range of 3 to 26 feet and can detect vehicles with speeds ranging from 1 to 37 mph (2 to 60 km/h). It also features 5 selectable menu settings options to ignore human movement.
Detects moving or stationary vehicles and uses doppler shift and FMCW detection technologies to count vehicles
Ignores human movement with 5 selectable menu setting options
Built-in heater reduces snow on the sensor (automatically activates based on the outside air temperature)
Installs above ground and is not affected by underground obstructions
No ground loop necessary for installation
The sensor easily mounts 2 to 3 feet off the ground and wires directly to the gate operator. No additional loop detector, need for special programmers, or need to stop traffic through the driveway during installation are required. A simple to use menu with visual indicators provides a simple and quick installation.
Vehicle Presence Sensor
(4) Screws
Installation Manual
Note: Always install the sensor on the vertical pole that is mounted in or on the ground. Installing a sensor on a tilted pole will result in a detection of the ground by the ultrasonic sensor and correct operation is not ensured.
Manufacturer Part #: OVS-01CC
UPC: 788924092164
Detection Method: Microwave (Doppler shift and FMCW)
Frequency: 24GHz
Response Time: 300msec
Power Supply: 12-24VDC
Current Consumption:
Max 200mA (at 24VDC) with Heater ON
Max 80mA (at 24VDC) when Heater is OFF

Output 1: Relay output DC20V, 0.3A (NO/NC selectable)
Output 2: Relay output DC30V, 0.3A (NO/NC selectable)
Input: NO/NC input
Detection Range: 3 feet to 26 feet (1 to 8m) Programmable maximum range
Detectable Vehicle Speed: 1 mph-37 mph (2 to 60 km/h)
Parameters:
Sensitivity: Level 1 to 5 (inc. Human Cancel Adjust.)
Output 1: NO/NC
Output 2: NO/NC
Max. Range: 3/7/10/13/16/20/23/26 feet (1/2/3/4/5/6/7/8 m)

Indicator:
Normal Operation: Stand-by: Solid Green, Detection: Solid Red
Detection Area Check:
Non-detection: Blinking Green
Detected: Blinking Yellow

Calibration: In calibration: Fast blinking blue
Sensor Reset: Reset completed: Blinking yellow for 2 seconds

Human Cancellation: Available from Level 1 to 5
Operation Temperature: -22°F to 122°F (-30°C to 50°C)
Operation Humidity: 95% max. (non-condensing)
International Protection Code: IP65
Installed Condition: Indoor/Outdoor
Installation Height: Installation Height of 20 inches (500mm)
Horizontal Angle Adjustment: Horizontally: ±30 deg. (5 deg. steps)
Weight: 480g (Including accessories)
Credentials: FCC