Product Parameter
Product: Shoe washing machine for rain boots
Material: Stainless steel
Water pipe: 10 meters
Length: About 25.5 cm/11.0 inches
Width: About 54.5 cm/21.3 inches
Height: About 84 cm/33.5 inches
Weight: About 14 kg
Side brush length: 8cm
Bottom brush length: 4cm
Overall brush range: 26*20cm
Brush: Built-in 15 water holes. Nylon material, hard and wear-resistant. The three-sided hard brush can effectively clean the sludge on the rain boots.

Packing list.
The three-sided hard brush can effectively clean the sludge on the rain boots.
Water pipe*1
Accessories*1 set

How to use.
1. Assemble the upper part of the machine to the lower part.
2. One end of the water outlet is connected to the faucet, and the other end is connected to the inlet valve of the shoe washing machine.
3. Mix the cleaning solution in the bucket, and then place the cleaning solution tube of the washing machine into the bucket.
4. Open the inlet valve, tighten and close the cleaning fluid valve.
5. Start cleaning the rain boots, rinse them with the outlet, move them back and forth, and then rinse them clean.